Best Ways to Conserve Water in a Bathroom

The bathroom is one of those places in your home that uses a lot of water. With so much water going down the drain every single day, it makes a lot of sense to be smart about conservation. You do not have to make extreme changes, but little daily practices can go a long way to save your bills on water consumption. It is always important to take the necessary steps to conserve water and save on the money that you set aside for your water costs at the end of the month. This article will look at proven ways to conserve water in your bathroom.

A Sink


Save Water when Bathing

If you prefer a shower to bathtubs, then you are a step ahead to conserving water in your bathroom. This is because showers consume less water compared to bathtubs. Shorter showers will do the trick if you are serious about saving water since most people spend a long time taking a bath. A three-minute shower uses a lot less water when compared to a bathtub. This is true especially when you turn the bathtub off to use shampoo and turning it back on to rinse off the soap. Always try to spend less than seven minutes bathing to save the amount of water you normally use in the bathroom.

Install a Water-Saving Toilet

The toilet is another fixture that uses more water than a shower. This is true for most people when you compare the number of times you shower in a day to the times you visit the toilet. When looking at efficiency improvements of water in your bathroom, the toilet should be one of your top priorities as it requires a large amount of water to keep it clean. You might have heard all kinds of horror stories relating to the older generation of low-flow toilets. They would require two to three times flushing to clear your toilet drainage. If you want to reduce the amount of water you use in the toilet, make an effort of purchasing a water-saving toilet. The dual-flush models are more powerful as they use less water, but are very efficient at getting the job done.

Upgrade your Showerhead

Check whether your shower head is up to scratch. A showerhead that is leaking could imply that a lot of water goes to waste each day without you knowing it. The best way to solve this problem is to upgrade your showerhead to a low-flow version that comes with high pressure. This type of a showerhead allows you to save water usage without compromising your existing shower, which saves you money. Newer designs of showerheads have air pressurized in the water. This helps give you a more powerful shower impression without ruining the experience. Furthermore, they are relatively affordable and easy to install, making them worth the investment.

Save Water at the Sink

Bathroom faucets offer the most affordable and easiest opportunities for saving water. Use cold water in a cup or glass while brushing your teeth. Instead of keeping the water running as you shave, you should consider filling the sink basin with water in the beginning before starting the task. It is a much better option of conserving water rather than keeping it running. A faucet aerator can also help to reduce water waste as it mixes air with tap water. It is usually installed on the screw-on tip of a faucet. Washers on leaky faucets could waste gallons of water and it is necessary to have them replaced. Turn off the faucet when using soap to wash your hands and turn it back on to rinse it off. Implementing these little practices on your sink every day, will help you save money on water usage.

Use Rain Barrels

Rain barrels can help you cut a significant amount of water wastage during summer. Set up one or two rain barrels during spring and summer to catch excess rainwater when the skies are at their worst. Besides using this water to flush down your toilet, you could use it for other cleaning purposes. It serves a dual purpose as it focuses on minimizing the amount of water in your bathroom. You can install rain barrels at different locations in your yard during spring. The best location for this will be at the end downspouts of your gutter. You can choose to recycle or retrofit pickle containers into rain barrels or buy new ones in the garden shops. It is important for the water in rain barrels to be used only for toilet flushing as it may contain chemical pollutants from the asphalt roof.

Reduce the Level of your Hot Water System Thermostat

Avoid a high thermostat setting of your hot water system as it will require a lot of cold water to reduce its level to favorable temperatures for use. Setting the hot water system thermostat too high not only wastes your water but also drains your energy. In the end, you will spend a lot of money making up for the wasted water and energy in your bathroom. If you are having difficulties adjusting the temperature of your system’s thermostat or you cannot do it yourself, then you should consider getting the help of a professional, as they have the expertise to make the right adjustments.

Are you ready to make a change? Save money on your water bill by practicing the aforementioned techniques of conserving water. The little efforts you make daily to lower your water consumption always go a long way to reducing the water costs at the end of the month. The bathroom is one of the places that use a lot of water in your home. Learn to turn off the faucets when not in use and repair any leaky pipes once you notice signs of damage. It is also important to ensure that all members of your family are following the same practices, if they are frequently using the same bathroom.